Upgraded reliability, leading warranty
Significant improvement in power generation performance
BOS cost savings
Operation and maintenance cost savings
We will provide you with professional consulting services, knowledge of photovoltaic charging station solutions, business models for the photovoltaic industry, and full lifecycle operation and maintenance capabilities. Welcome to call us.
1. The front and back side of solar panel effect pictue(Drawing Show)
2. Solar Panel Working Way:(Drawing Show)
3. Solar Paenl Output Electrical performance:
1) Nude Solar Panel Electrical Performance:
Output Power(@STC )
60.0 W ±5%
Open Voltage(@STC)
24.48V ±5%
Standard Voltage(@STC)
19.44V ±5%
Standard Current(@STC)
3.086A ±5%
Short Circuit(@STC)
3.333A ±5%
2) The Electrical Performance of output port:
ITEMS
Standard
Remark/Condition
Output Ports of controlbox--USB-A and USB-Cwith PD45W
USB-A/5V(Voc)
5V +5%
USB-A/5V(Vmp)
USB-A(3.0A)
USB-A/9V(Voc)
9V +5%
USB-A/9V(Vmp)
USB-A(2.5A)
USB-A/12V(Voc)
12V +5%
USB-A/12V(Vmp)
USB-A(2.0A)
USB-Total/A
4A (Max)
Type-C/5V(Voc)
Type-C/5V(Vmp)
Type-C(3.0A)
Type-C/9V(Voc)
Type-C/9V(Vmp)
Type-C/12V(Voc)
Type-C(Vmp)
Type-C(2.0A)
DC5521 Output
19.44V(60W Max)
Note: STC: Standard Tested Condition: AM=1.5 , 25℃ , 1000W/㎡
4. Solar Panel Basic Specification:
Unfolded Size
110*47CM/43.31*18.50inch
Folded Size
47*48*3.1CM/18.50*18.90*1.22inch
Net Weight
1.7KG/3.74Ibs
Size Specification (Drawing)
5. Solar Panel Component and Material Specification:
Compound Material
Newest Fiber Material
PV welding strip
0.6*0.18mm
Braided copper tape
10×13MM/0.05
Solar cells
0.18mm ,182-10BB solar cell
EVA
0.45mm
ETFE
0.02mm,Dull Polish surface
Fabric between solar cells and EVA
0.3mm
Fabric backside
0.4mm
Gun black eyelets
Inner-Diameter:10mm,Outer diameter:16.5mm
Gun black screw buckle
Diameter-of-axle-5mm,axial length-3mm,Cap diameter-9.5mm
Black gun button
Surface buckle diameter 15mm matching
Handle shell
29x7.2x3.1CM
Controller
USB+TYPE-C+DC5521 with watproof cover
Bottom board of support
1.2mm
Elastic band
Length:250mm±10mm,Two ends of nylon cloth binding
Accessories
DC5521 to DC5521 cable ,10 in 1 connectors
6. Lamintated method and surface effect:
1) Lamination:multiple layers material by hot pressing;
2) Surface effect of solar panel: front- matt ETFE, back-waterproof cloth;
3) Silicone inside the wiring board.
7. Warranty:
1 Year.
8. Standard method of electrical performance and using environment
1) Working power tested after lamination;
2) Solar radiation intensity: 1000W/m2 or customer sample;
3) Temperature: 25 ℃;
4) Humidity: 10~90%;
5) Air quality: AM1.5
9. Working Power Test
1) Adjust the light strength to the customer's signature of sample;
2) Tested by IV tester;
3) Correct the light intensity every 2 hours
10. Environmental conditions for use and storage
1) Storage conditions: normal temperature, humidity not more than 60%;
2) Enure the solar panel located outdoor environment without shelter in the sun;
3) Working ambient temperature: - 20 ℃~60 ℃;
4) Temperature of soldering iron: 360 ± 10 ℃;
5) The time of spot welding shall not exceed 3 seconds, and the interval time between multiple spot welding shall not be less than 30 seconds.
11. Appearance inspection requirements:
Note: During appearance inspection, the hand-held product is parallel to the line of sight, with a sight distance of 30cm, a tilt of 45 degrees, a left and right deflection of 15 degrees, and no obvious defects can be found within 5 seconds
Code description: L: length W: width H: height D: distance N: quantity ⊙: diameter
1)Single panel, no obvious color difference under indoor lighting;
2)The silicon wafers are arranged neatly;
3)Silicon chip edge collapse and missing corner: L ≤ 3.5mm W ≤ 3.5mm N ≤ 8;
4)Silicon chip surface stain: ⊙ ≤ 4mm N ≤ 8;
5) Scratch: L ≤ 10mm;
6)No obvious bright spot: W ≤ 1.5mm N ≤ 6;
7)There is dirty between Solar cells, and the spot area: ⊙ ≤ 0.8mm N ≤ 8;
8)Tin slag, bubbles and foreign matters in the glue: ⊙ ≤ 2.5mm N ≤ 6;
9)For laser cutting process, the tolerance range of length and width is ± 0.25mm;
In case of any dispute over the above standards, the limit sample confirmed by both parties
12. Package Details:
4PCS/CTN
Unit Product
Unit Product with inner box
Unit Carton
Weight
2.3KG/5.06Ibs
10KG/22KG
Size
47*48*3.1CM/18.50*18.90*1.22Inch
51*53*6.5CM/20.08*20.87*2.56inch
52.5*54.5*28CM/20.67*21.46*11.02inch